Full modem test – Shiro ADSL 2/2+ Ethernet Modem User Manual
Page 86
User Manual
Page 86
of 92
4. Click
Test.
The ping results are displayed in the page. If the ping test was successful, it means that the
TCP/IP protocol is up and running. If the Ping test failed, you should restart the router.
Full Modem Test
This test is used to check if your modem is properly connected to the network.
To perform a Full Modem test:
1. From
the
Advanced Menu, select Diagnostics. This opens the Diagnostics page.
2. Click
Full Modem Test. This opens the Modem Test page.
3. Select your connection and then click Test.