Sound umd – Sony PlayStation Portable PSP-1003 K User Manual
Page 118
118
Troubleshooting
There is no sound.
, Check that the volume is not set to zero. Try raising the volume
(
, Check that the mute setting is not on. Press the sound button on the system
front to clear the mute setting (
, If Headphones are inserted, the system will not produce any sound through
the speakers.
, See "Sound quality is poor." (below) for details.
The volume does not turn up.
, Check that the AVLS feature is turned off. When turned on, the AVLS
feature limits the maximum volume of the Headphones (
, The ear friendly Headphones are specifically designed to limit sound
pressure level to a maximum of 90dB.
Sound quality is poor.
, If the system is used in an area where there are vibrations, or if it is near
strong magnetic objects such as a television, the sound may be distorted and
there may be increased background noise. Try moving the system to a
different location.
The system does not recognise the UMD™.
, Check that the UMD™ is properly inserted (label is facing the system rear,
etc.). Try taking out the UMD™ and reinserting it.
, Check that the UMD™ recorded surface is clean. If not, wipe it gently with
a soft cloth (
The UMD™ does not play properly.
, If moisture condensation occurs, remove the UMD™ from the system and
do not use the system for several hours until the condensation evaporates
(
Sound
UMD™