Star Micronics PT-10Y - Manual (Page 9)

Printing on fanfold paper 7
English
❏
Plug the printer back into its AC power source. The printer will beep to
indicate that paper is not loaded properly.
❏
Press the control panel’s PAPER button and the paper will feed to the
starting position.
Printing on fanfold paper
When printing on fanfold paper, take care not to print too close to the
perforations that separate each sheet. The following shows the recommended
print area for fanfold paper.
Also note the following important points whenever using fanfold paper and
continuous forms.
✓
You can use the same line feed and form feed operations as you use with
single-sheet paper.
✓
When using continuous multi-part forms, do not use forms with more than
three parts.
✓
Be sure to adjust the printer for the proper paper thickness before printing.
Important!
Keep the release lever in the forward position while printing on fanfold paper.
25.4mm
25.4mm
75mm
5mm
18mm 18mm
Perforation
Bottom of
Form