Star Micronics PT-10Y - Manual (Page 5)

Removing the push tractor unit from the printer 3
English
❏
Making sure that the release lever on the PT-10Y Tractor Feeder is pressed
down, position the tractor feeder so that the two U-shaped pieces on the
tractor feeder come into contact with the round tabs inside the printer.
❏
Lower the back of the tractor feeder down so that its two tabs smoothly
enter into the tractor feeder hooks and snap into place.
❏
Raise the release lever so that it locks the tractor feeder onto the printer.
❏
Re-install the automatic sheet feeder as described in the printer’s Users
Manual.
❏
Close the front cover of the printer.
Removing the push tractor unit from the printer
❏
Make sure that the printer is unplugged from its AC power source.
❏
Open the front cover.
❏
Detach the automatic sheet feeder.
❏
Press the release lever down to unlock the tractor feeder.
Release lever