Samsung DynaFlat TX R3265 - Manual (Page 16)

I N S TA L L AT I O N
English - 16
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a set of audio cables between
the AUDIO OUT jacks on the TV and the
AUDIO IN jacks on the VCR. (The VCR
input jacks might be either on the front
or on back of the VCR.)
2
Connect a video cable between the
VIDEO OUT jack on the TV and the
VIDEO IN jack on the VCR.
Refer to your VCR’s instructions for
more information about how to record
using this kind of connection.
Refer to your VCR’s instructions for
more information about how to record
using this kind of connection.
TV Rear Panel
K61A_AA03447B_00Eng 3/11/05 4:26 PM Page 16