Samsung RNX-EASYN4 - Manual (Page 53)

Wireless Router RNX-EasyN4 User Manual
Adding an address into the list
Enter the "MAC Address" and "Comment" of the wireless station to be added
and then click . The wireless station will now be added into the "Current
Access Control List" below. If you are having any difficulties filling in the fields,
just click "Clear" and both "MAC Address" and "Comment" fields will be cleared.
Remove an address from the list
If you want to remove a MAC address from the "Current Access Control List
", select the MAC address that you want to remove in the list and then click
"Delete Selected". If you want to remove all the MAC addresses from the list,
just click the button. Click will clear your current
selections.
Click at the bottom of the screen to save the above configurations.
- Wi-Fi Protected Setup (WPS)
WPS is the simplest way to establish a connection between the wireless clients
and the wireless router. You don’t have to select the encryption mode and fill in a
long encryption passphrase every time when you try to setup a wireless connection.
You only need to press a button on both wireless client and wireless router, and the
WPS will do the rest for you.
The wireless router supports two types of WPS: WPS via Push Button and WPS
via PIN code. If you want to use the Push Button, you have to push a specific button
on the wireless client or in the utility of the wireless client to start the WPS mode, and
switch the wireless router to WPS mode. You can simply push the WPS button of the
wireless router, or click the ‘Start to Process’ button in the web configuration
interface. If you want to use the PIN code, you have to know the PIN code of the
wireless client and switch it to WPS mode, then fill-in the PIN code of the wireless
client through the web configuration interface of the wireless router.