SV Sound SX-VT - Manual (Page 30)

SX-ST / SX-SV User Manual page 30
Main outputs
Output type: electronically balanced
Output impedance: <50•.
Nominal output level: +6dBu or +4dBu depending on global nominal level setting
Maximum output level: +25dBu ( +22.5dBm Z-load 600 )
Output Noise :
unweighted 20Hz to 22kHz
Master faders closed: -1xx dBu
Master faders at max: -100.0dBu
One input ch. at unity gain: - 92.0dBu
Frequency response :
10Hz to 200kHz ± 0.5dB
Distortion THD+N : 0.03% at 10 Hz / 0.005% 100Hz to 22kHz
Crosstalk (stereo pair ) : 100dB 10Hz to 1kHz / 90dB at 22kHz
Auxiliary outputs
Output type: electronically balanced
Output impedance: <50•.
Nominal output level: +6dBu or +4dBu depending on global nominal level setting
Maximum output level: +25dBu ( +22.5dBm Z-load 600 )
Output Noise :
unweighted 20Hz to 22kHz
Master faders closed: -1xx dBu
Master faders at max: - 84.0dBu
One input ch. at unity gain: - 84.0dBu
Frequency response :
10Hz to 200kHz ± 0.5dB
Distortion THD+N : 0.035% at 10 Hz / 0.005% 100Hz to 22kHz
Crosstalk: 87dB 10Hz to 1kHz / 80dB at 22kHz
Monitor outputs
Output type: stereo, unbalanced, transformerless
Output impedance:
Maximum output level: +20dBu
Headphones output level: 0dBu in position 3, +11dBu@75. and max. +13dBu @150•.
Load impedance :
xx• minimum for each monitor output
Return Inputs
Input type: electronically balanced
Input impedance: 6.8k• , linear from 10 Hz to 200 kHz
Nominal input level: +6dBu or +4dBu
OSC ref tone
Frequency: 1kHz
Level :
nominal level , according the global level setting
Distortion THD+N : xxx
Slate/Comm Mic Input
Input type: electronically balanced
Input Gain:
Mic powering: selectable 6Vdc for Electret or 48V phantom for Condenser microphone