Sanyo VMC-8618 - Manual (Page 7)

PARTS NAMES
Rear Panel
1 AC INPUT socket
Connect the AC power cord (supplied) securely to this
socket and to a wall outlet.
2 Rear A terminals (AUDIO/VIDEO A terminals)
When the monitor A selector button at the front of the
monitor is pressed, the audio and video signals from the
component which is connected to these terminals can be
monitored.
A AUDIO OUT/IN terminals
B VIDEO OUT/IN terminals
3 Rear B terminals (AUDIO/VIDEO B terminals)
When the monitor B selector button at the front of the
monitor is pressed, the audio and video signals from the
component which is connected to these terminals can be
monitored.
C AUDIO OUT/IN terminals
D VIDEO OUT/IN terminals
4 Rear Y/C terminals (AUDIO/VIDEO Y/C
terminals)
When the monitor Y/C selector button at the front of the
monitor is pressed, the audio and video signals from the
component which is connected to these terminals can be
monitored.
E AUDIO OUT/IN terminals
F S-VIDEO OUT/IN terminals
Note: If there is no signal being input from the input
terminals selected (A, B or Y/C) at the rear of the
monitor, “NO SIGNAL” will be displayed.
2 3 4
1
L8MV5/US, L8MW5/US (VMC-8618, 8613 GB) 2001. 2. 23
5