Suspension mount, Power requirements, Operation positioning – Shure KSM42 User Manual
Page 5
6
Suspension Mount
Use the supplied ShureLock
®
rubber suspension mount to
secure the microphone to a floor or boom stand.
Important: Thread the knurled locking ring securely to the
base of the microphone. Do not overtighten.
Power Requirements
This microphone requires phantom power and performs best with a 48 Vdc supply (IEC-268-15/DIN 45 596).
However, it will operate with slightly decreased headroom and sensitivity with supplies as low as 11 Vdc.
Most modern mixers provide phantom power. You must use a balanced microphone cable: XLR-to-XLR or
XLR-to-TRS.
OPERATION
Positioning
Position the front of the microphone, with
, towards the desired sound source. Position the rear of
the microphone, with the vintage circle S logo, towards any unwanted sound sources.
- ROSWELLITE KSM313 (12 pages)
- ES-230 (1 page)
- UHF-R (39 pages)
- SM58 (12 pages)
- WL51 (2 pages)
- ROSWELLITE KSM353 (12 pages)
- KSM44A (10 pages)
- WL183 (2 pages)
- 515SDX (11 pages)
- 54 (66 pages)
- WL93 Subminiature Omnidirectional Lavalier Microphone with 4' Cable and TA4F Connector (Black) (12 pages)
- SM98A (6 pages)
- 588SDX (12 pages)
- BETA54 (15 pages)
- 596LB (2 pages)
- SM87A (12 pages)
- EZB/O (2 pages)
- M810E (16 pages)
- SM48 (4 pages)
- 562 (2 pages)
- LX88-II (11 pages)
- MX692 (20 pages)
- BETA 98/S (11 pages)
- THE TWIN PRO 27C8642 (10 pages)
- 565SD (12 pages)
- Wl185 (2 pages)
- KSM109 (9 pages)
- KSM109 (10 pages)
- SM7B (16 pages)
- 450 (2 pages)
- EZO/G (2 pages)
- KSM32 (8 pages)
- KSM32 (51 pages)
- 545SD (12 pages)
- RK279 (2 pages)
- 810 (2 pages)
- PGXD (18 pages)
- LEGENDARY PERFORMANCE SM57 (15 pages)
- Microplex Lavalier Microphone MX100 (12 pages)
- R89 (1 page)
- 515BSLX (2 pages)
- WH30XLR (10 pages)
- MX690 (20 pages)
- R90 (1 page)