Part names and functions, Remote control code, Wireless mouse operation – Sanyo PLC-SU60 User Manual

Page 14

Part Names and Functions

This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other
seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several
projectors or video equipment at the same time. (Change the remote control code for the projector first before changing
that for the remote control. See “Remote control” on page 42.)

While pressing the MENU button, press the IMAGE button
number of times corresponding to each remote control code
number. Each time you press the IMAGE button, the code is
changed sequentially. (See the list below.)

To initialize the remote control code for the remote control,
slide the RESET/ON/ALL-OFF switch to the RESET, and then
to the ON. The initial code is Code 1.

Remote Control Code

MUTE

PAGE

FREEZE

D. ZOOM

NO SHOW

RESET

ALL OFF

COMPUTER 1

L ASER

ASER

FOCUS

K E YSTONE

YSTONE

ZOOM

COMPUTER 2

VIDEO

CLICK

SELECT

IMAGE

AUTO SET

TIMER

IMER

AUTO PC

OFF

While pressing the MENU button,
press the IMAGE button number of
times corresponding to the remote
control code for the projector.

Remote Control Code

Number of Times of

Pressing IMAGE Button

Code 1

Code 2

Code 3

Code 4

Code 5

Code 6

Code 7

Code 8

MENU button

IMAGE button

The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect
your computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function is
used, the wireless mouse is not available.

Wireless Mouse Operation