Sharp CD G14000 User Manual
Page 34
08/1/15
CD-G14000_EN.fm
34
Tape Recording
TINSEA128AWZZ
CD-G14000
Recording on a cassette tape (continued)
Recording from a CD (or MP3 disc)
To stop recording:
Press the button.
The CD and tape will stop.
TIMER
POWER
ON/ STAND-BY
CD
TUNER
(BAND)
4
3
1
5
4
5
3
2
1
PRESET
TUNING
PRESET
TUNING
VOL.
VOL.
PHONES
AUDIO IN
RECORD/PLAYBACK
PLAYBACK (PLAY & S
TOP)
REMOTE
SENSOR
2
TAPE
(1 2)
OPEN/
CLOSE
c
AUDIO
IN
OPEN/
CLOSE
c
POWER
ON/ STAND-BY
CD
4
5
3
2
1
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the
button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired
disc.
6
Within 5 seconds, press the / button to start recording.
Recording is started from the selected CD. When the
playback of the last track is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.