Sharp CD G14000 - Manual (Page 23)

CD-G14000
08/1/16 CD-G14000_EN.fm
23
CD or MP3/WMA disc Playback
TINSEA128AWZZ
Advanced CD or MP3/WMA disc playback
To specify a disc to play
You can play a disc by specifying the disc number.
Playback will begin from track 1 on the chosen disc.
After the last track on the last disc is played, the unit stops
automatically.
Note:
If the disc tray with no disc is selected, playback will not start and the
disc indicator will disappear.
To stop playback:
Press the (CD ) button.
Direct track search
By using the direct search buttons, the desired tracks on the current
disc can be played.
If the direct search buttons are pressed while the disc is stopped,
press the / button to start the desired track on the current disc.
Notes:
A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.
1 Press one of the 1 - 5 buttons to select the desired disc.
Selected disc number
2 Within 5 seconds, press the / button on the main unit.
TAPE (1 2)
TIMER
POWER ON/ STAND-BY
CD
TUNER
(BAND)
4 3
1
5
4
5
3
2 PRESET PRESET
REMOTE
SENSOR
2
TAPE
(1 2)
OPEN/
CLOSE c
Use the direct search buttons on
the remote control to select the
desired track while playing the
selected disc.
Selected track number
The direct search buttons allow you to select up to number 9.
When selecting number 10 or more, use the “+10” button.
A. For example, to choose 13
1 Press the “+10” button once.
2 Press the “3” button.
B. For example, to choose 30
1 Press the “+10” button three times.
2 Press the “0” button.