Sharp CD G14000 - Manual (Page 14)

08/1/15 CD-G14000_EN.fm
14
Preparation for Use
TINSEA128AWZZ
CD-G14000
System connections (continued)
Connecting the subwoofer
Use the subwoofer cable to connect the SUBWOOFER PRE-OUT
jack on the main unit and the SUBWOOFER IN jack on the active
subwoofer.
AC power connection
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the unit
first, the unit will enter the demonstration mode.
Notes:
Make sure to unplug the AC power cord of the main unit before
making any connections.
75 OHMS
FM GND AM ANTENNA
RA TED SPEAKER IMPEDANCE : 6 OHMS MIN.
Main unit
Subwoofer cable
Active subwoofer
To subwoofer
output jack
To subwoofer
input jack
The unit will start the tape initialization when plugged in to the AC
outlet. During this process, an initializing sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.
75 OHMS
FM GND AM ANTENNA
RA TED SPEAKER IMP
EDANCE : 6 OHMS MIN.
Active subwoofer
Main unit
AC outlet
(AC 120 V ~ 60 Hz)
AC outlet
(AC 120 V ~ 60 Hz)