Samsung SV-645B - Manual (Page 12)

GB
21
GB
20
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3 Press the OK button to select this option.
4 Press the corresponding " or ❷ buttons, until the TAPE
SELECT option is selected.
5 Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6 Press MENU twice to exit the menu.
Selecting the Recording Speed
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1 Press the MENU button on the remote control.
2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the " or ❷ buttons to select MANUAL SET UP option.
And then press the ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
5 Press the corresponding " or ❷ buttons, until the required preset
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
6 To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
7 Press the " or ❷ buttons to select required position. And then
press OK again to swap the position.
8 You can modify this station by repeating the same procedure from
Step
5 onwards.
9 On completion, press the MENU button three times to exit the
menu.
Changing the Preset Station Table
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
" ❷!! ➛❿!! OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
" ❷ ❿ END: MENU
** TV STATION TABLE **
PR CH NAME
1 027 CAEB
2 --- ----
3 --- ----
4 --- ----
5 --- ----
" ❷ SWAPPING: OK
MENU
** TV STATION TABLE **
PR CH NAME
1 --- ----
2 --- ----
3 027 CAEB
4 --- ----
5 --- ----
" ❷ SWAPPING: OK
MENU
OPTIONS
USER SET
PROG OPTIONS INSTALL
CLOCK BONUS LANG
" ❷!! ➛❿!! OK END: MENU
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
" ❷ ❿ END: MENU
OK
SPEED DUB TV/VCR TIMER