Sanyo CLT-D6623(WH) - Manual (Page 26)

6
HANDSET.SETTING
Change.ring.and.key.tones
There is a choice of 10 polyphonic ring melodies and 4 ring tones. You can also
choose from 4 key tones.
To.adjust.ring.volume:
1. Touch
and select the RING SETTING menu and then the RING
VOLUME submenu.
2. Use
or to select ' EXTERNAL CALL ' or ' INTERNAL CALL '. Touch
to confirm.
3. Use or .to select volume level. (Select ‘OFF’ to silence the ring tone).
4. Touch .to confirm..
NOTE:. will appear to indicate external ring tone is silenced if ‘OFF’ is
selected.
To.adjust.ring.tone:
1. Touch
and select the RING SETTING menu and then the RING TONE
submenu.
2. Use
or to select ' EXTERNAL CALL ' or ' INTERNAL CALL '. Touch
to confirm.
3. Use or .to select ring tone.
4. Touch .to confirm.
To.adjust.key.tone:
1. Touch
and select the PHONE SETUP menu and then the KEY TONE
submenu.
2. Use
and .to select key tone.
3. Touch .to confirm.
Handset.reception
Interference from other electrical appliances such as televisions,microwave
oven or computer should be avoided. If you are out of range or the signal is
interrupted will disappear and ‘OUT OF RANGE’ will be displayed.
NOTE: Due to radio interference occasional loss of synchronization between the
handset and base unit may occur. If this happens the base unit will very quickly
switch to another channel automatically to restore synchronization.