Sanyo CLT-D6623(WH) - Manual (Page 19)

9
Calling.stored.numbers
1. Touch .
2. Touch and .to scroll to the entry you wish to dial.
OR
Touch the
1.-.9 key corresponding to the st letter of the entry and use
and .to select name you are seeking; for example names beginning
with “R” touch 7 three times.The first location that begins with the letter you
entered appears.
3. Touch
.to dial.
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . .
You must subscribe to Caller ID service through you local telephone company to
use these feature.If a caller number matches one of the number in the phone-
book, the display will show the name information in the stored memory even if
the incoming call does not have the name.
NOTE: Check with your local telephone company regarding name service.
. . . . . . . . . .
Caller.ID.with.call.waiting
When you subscribe to Caller ID with Call Waiting service from your telephone
company, you are able to see who is calling when you hear the Call Waiting
beep. Caller identification information appears on screen after you hear the
beep.
Touch
key to put the current call on hold so that you can answer the
incoming call. To return to the first call, touch again.
Call.log
The incoming caller information transmitted from the telephone company is
received by your phone between the first and second ring and stored in the Call
log. If you answer a call before the second ring the caller information may not be
stored.
When the Call log memory is full, a new call automatically replaces the oldest
call in memory.
PHONEBOOK
CALLER.ID.DISPLAY