Sanyo CLT-D6623(WH) - Manual (Page 10)

0
Choose.the.best.location
When choosing a location for your new phone, here are some import guidelines
you should consider:
1. The location should be close to both a phone jack and a continuous power
outlet ( one which is not connected to a switch).
2. The base and handset should be kept away from sources of electrical noise
such as motors, microwave ovens, and fluorescent lighting.
3. For better reception, place the base as high as possible.
4. The base should be placed in an open area for optimum range and reception.
Connecting.the.base.unit
Plug the AC adapter into the POWER
DC 6V jack on the back of the base.
Plug the other end into a standard
120V AC wall outlet.
GETTING.STARTED
SAFETY.AND.CARE
• Use only the power source marked on the power supply (adapter). If you are
unsure of the power supplied to your home consult your power company. Do..
. not place objects on the power cord.
•
Never use this unit near a gas leak as this can cause explosions.
• Occasional loss of synchronization between the handset and base unit is
normal if there is significant interference from the surrounding environment.
• Disconnect the telephone line from the wall-outlet before replacing battery.
. CAUTION:
You must use a Class power source that supplies 6V DC and delivers at
least 300mA. Its plug must fit the phone’s DC IN jack. The supplied adaptor meets
these specifications. Using an adaptor that does not meet these specifications
could damage the phone or the adaptor.
Always connect the AC adaptor to the phone before you connect it to AC power.
When you finish, disconnect the adaptor from AC power before you disconnect from
the phone.