Soleus Air KC-25U - Manual (Page 11)

Fan Speed Temperature
Set FAN SPEED to the desired setting. When the air conditioner Turn the TEMPERATURE control to a mid-setting. Adjust the air
is operating at Low Cool, High Cool (on some models), Med Cool conditioner's performance by turning the Temperature control
(on some models) or Turbo Cool (on some models), the fan clockwise for maximum cooling. For less cooling, turn the
circulates air continuously. TEMPERATURE control counterclockwise. Experiment to find the
o Turbo Cool (on some models)—for maximum cooling setting that suits you best.
o High Cool (on some models)—for normal to maximum
cooling (depending on model)
o Med Cool (on some models)—for normal cooling
o Low Cool—for sleeping comfort
o Power Saver (on some models)—Fan run only when
cooling is needed. Fan and compressor stop running
when room temperature matches the Temperature control
setting.
o Fan Only—to move air continuously without cooling
FAN CONTROL Changing Air Direction
You can use the tab, depending on model, to direct the
air right or left. Rotate the whole cartridge to direct air up, down or
straight ahead. A
A. Tab
A
A. Cartridge
Normal Sounds
When your air conditioner is operating normally, you may hear
sounds such as:
•
Droplets of water hitting the condenser, causing a pinging
or clicking sound. The water droplets help cool the
condenser.
•
Air movement from the fan.
•
Clicks from the thermostat cycle.
•
Vibrations or noise due to poor wall or window construction.
•
A high-pitched hum or pulsating noise caused by the
modern high-efficiency compressor cycling on and off.
11