Sharp AR-P350 - Manual (Page 4)

0-2
CAUTIONS
1. Do not touch the photoconductive drum. Scratches
or smudges on the drum will cause dirty printouts.
2. The fusing unit is extremely hot. Exercise care in
this area.
3. Do not look directly at the light source of a scanner
module. Doing so may damage your eyes.
4. Five installation adjusters are provided on a stand/
paper drawer which is provided as a peripheral unit.
When moving the machine with a stand/paper drawer,
be sure to raise the installation adjusters. After
moving the machine, lower the five installation
adjusters until they reach the floor.
5. Do not make modifications to this machine. Doing
so may cause a fire or an electric shock.
6. When moving this machine, be sure to use two to
four persons. Since this machine is heavy, moving
it by yourself may cause an injury.
7. When connecting this machine to a computer, be
sure turn off this machine and the computer in
advance.
8. When opening or closing the covers or paper trays
for misfeed removal or loading paper, take care not
to get your fingers caught in the covers or trays.
9. Do not print anything which is prohibited from printing
by law. The following items are normally prohibited
from printing by national law. Other items may be
prohibited by local law.
● Money ● Stamps ● Bonds ● Stocks
● Bank drafts ● Checks ● Passports
● Driver's licenses
Fusing unit
Adjuster
Lock Release
"BATTERY DISPOSAL"
CONTAINS MANGANESE DIOXIDE LITHIUM BATTERY. MUST BE DISPOSED OF PROPERLY.
CONTACT YOUR SHARP DEALER OR SERVICER FOR INSTRUCTIONS.
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact
your local authorities or the Electronics Industries
Alliance:www.eiae.org