Woodstock 52" FOOT SHEAR M1044 - Manual (Page 10)

-8-
M1044 52" Foot Shear
SE
T
U
P
• Floor Load: This machine distributes a
heavy load in a small footprint. Some floors
may require additional bracing to support
both machine and operator.
• Working Clearances: Consider existing and
anticipated needs, size of material to be
processed through the machine, and space
for auxiliary stands, work tables or other
machinery when establishing a location for
your foot shear.
• Lighting: Lighting should be bright enough
to eliminate shadow and prevent eye strain.
MAKE your shop “child
safe.” Ensure that your
workplace is inaccessible
to youngsters by closing
and locking all entrances
when you are away. NEVER
allow untrained visitors in
your shop when assem-
bling, adjusting or operat-
ing equipment.
Cleaning Machine
The table and other unpainted parts of your
foot shear are coated with a waxy grease that
protects them from corrosion during shipment.
Clean this grease off with a solvent cleaner or
citrus-based degreaser. DO NOT use chlorine-
based solvents such as brake parts cleaner or
acetone—if you happen to splash some onto a
painted surface, you will ruin the finish.
Machine Placement
USE helpers and power
lifting equipment to
lift this 52" foot shear.
Otherwise, serious per-
sonal injury may occur.
NEVER use gasoline or
other petroleum-based
solvents to clean with.
Most have low flash
points, which make them
extremely flammable.
A risk of explosion and
burning exists if these
products are used. Serious
personal injury may occur
if this warning is ignored!
ALWAYS work in well-
ventilated areas far from
possible ignition sources
when using solvents to
clean machinery. Many
solvents are toxic when
inhaled or ingested. Use
care when disposing
of waste rags and
towels to be sure they
DO NOT create fire or
environmental hazards.