Sanyo 710-00792-1 - Manual (Page 4)

,,,
,,,
,,,
3
J0INT TOP AND BOTTOM CABINETS
Lift the Top Cabinet and put it on the Bottom
Cabinet. When setting the Top Cabinet, be sure
the frame of the Bottom Cabinet is fitted into the
frame of the Top Cabinet completely.
Remove the 14 Screws and the Back Cover. Keep
the screws and Back Cover. All the installations are
finished, all those parts should be replaced.
Remove the Cover Plate on the lower part of the
Top Cabinet. Keep the Cover Plate for later use.
Replace this plate when the appliance need to be
transported.
Joint Top and Bottom Cabinets
Remove Back Cover
Remove Cover Plate
1
2
3
Joint the Top and the Bottom Cabinets with the 4
Joint Bolts securely.
Fix the Cabinets 4
CAUTION
BE SURE TO FIX THE CABINETS WITH
JOINT BOLTS. IF THE TOP AND THE
BOTTOM CABINETS ARE NOT FIXED
PROPERLY, THE TOP CABINET MAY
BE DROPPED OR FALL DOWN.
Screws (14 pcs)
Bottom
Cabinet
Top
Cabinet
Be sure the frame of
the Bottom Cabinet
is fitted into the
frame of the Top
Cabinet completely.
Bottom
Cabinet
Top
Cabinet
Joint Bolts
(4 pcs) Joint Bolts
(4 pcs)
Cover Plate
Frame
CAUTION
THE TOP CABINET OF THIS PROJECTOR
HAS ITS GRAVITY AT THE SCREEN SIDE.
WHEN LIFTING THE TOP CABINET, BE
CAREFUL NOT TO DROP.