Socket Mobile Cordless Serial Adapter - Manual (Page 12)

SCENARIO 1: Set up a CSA pair for cable replacement.
To set up a pair of Cordless Serial Adapters as serial cable replacement, one
CSA must be an acceptor, and the other an initiator (e.g., in the previous
example, the printer would be acceptor, and the laptop would be initiator).
¾ Set up the Acceptor
1. In the Device role box, select Acceptor. Click Properties.
Select
Acceptor.
Click
Properties.
2. In the General screen, change the Friendly Name if desired. For example,
you may want to enter a name like “Socket CSA-Acceptor.” Note the
Bluetooth Address of this CSA. You will need it to configure the initiator.
Write down the
Bluetooth Address.
You will need it
while configuring
the other CSA.
If desired,
change the
Friendly
Name.
12