Socket Mobile Cordless Serial Adapter - Manual (Page 11)

5. Now you are ready to enter the Device role and properties. The
appropriate settings will vary depending on what device(s) you are using
and how they can communicate. The following pages will include
instructions for two of the most common scenarios:
• Scenario 1: Set up a CSA pair as serial cable replacement.
Example: Replace a printer cable with a wireless Bluetooth
connection between your laptop and printer.
• Scenario 2: Set up one CSA as a passive serial Bluetooth receiver.
Example: Use the CSA to Bluetooth enable industrial equipment,
which you can then control and monitor from a Bluetooth enabled
Pocket PC.
Notes:
• If you have another scenario, refer to Chapter 3 for instructions on each
properties page.
• Make sure you manually configure your baud rate and other settings in
any third-party applications used with the CSA. Auto-detect and Plug
and Play functions are not reliable with Bluetooth, and the CSA may not
work properly unless you manually enter the correct settings.
CHAPTER 2: SETUP 11