Speco Technologies LCD Monitor M19LCBVH3 - Manual (Page 8)

FUNCTION
SLEEP-TIMER: Lets you set the monitor to
turn off after a given amount of time (OFF,
15min, 30min, 45min, 60min)
DLC: ON / OFF
NOISE REDUCTION:
（OFF、 LOW 、
HIGH
）
HSTART
、HSIZE、VSTART、VSIZE:
Only available under AV Mode.
Adjust the OSD image horizontally or
vertically by pressing the
“-“/ “+” button.
AUDIO
BASS: Adjustment range:0-100
TREBLE: Adjustment range:0-100
BALANCE: Adjusts how much audio is
sent to the left and right (-50 to +50).
The intermediate value is 0. When
indication value of balance increases
toward +50, the volume of the right and left
speaker increase and decrease. When the
indication value of balance decreases
toward -50 the volume of the right and left
speaker increase and decrease.
SOUND MODE: Provides special
processing through your speakers
(depending on the setting you chose as
your Sound Type). The available audio
modes are: User, Standard, Movie, and
Music.
AVC: (Automatic Volume Control)
ON & OFF
3. HDMI Input mode
PICTURE
CONTRAST: Adjusts the difference
between the light and dark areas of the
picture.
BRIGHTNESS: Adjusts the brightness of
the picture.
HUE: -50 to +50 (only available on AV
PAL)
SATURATION: 0-100
SHARPNESS: 0-100
COLOR TEMP:
Press the “+” button to
change the color intensity of the
temperature selected (Normal, Warm,
Cool, S-RGB, User)
SCALE: Full, Normal, or Center
PICTURE MODE: User, Standard, Soft, or
Vivid
OSD
LANGUAGE: Lets you select your
preferred language for the menus:
(English, Chinese, German, French,
Italian, Spanish, Portuguese, or Russian)
H-POSITION: Adjust the OSD image
horizontally by pressing the + or
– buttons.
V-POSITION: Adjust the OSD image
vertically by pressing the + or
– buttons.
DURATION: 5-60
HALFTONE: 0-100
BACKLIGHT: HIGH MID LOW
MEM-RECALL: Pressing the + or
– key
will reset all settings back to the factory
default settings.
14
15