Samsung SF-340 Series - Manual (Page 18)

P
ROGRAMMING
AN
D
D
IALLING
2.3
P
ROGRAMMING
AN
D
D
IALLING
P
ROGRAMMING
AN
D
D
IALLING
P
ROGRA
M
MI
NG
AND
D
IALLING
P
ROG
R
AMMING
AND
D
IALLING
P
ROGRAMMING
AN
D
D
IALLING
P
ROGRA
M
MI
NG
AND
D
IALLING
P
ROGRA
M
MING
AND
D
IALLING
4 Enter the name and press Enter .
• If you do not want a name, just skip this step by pressing Enter . If you have subscribed to a Caller ID service,
it is recommended you enter a name.
• You can assign up to 20 characters to a name. see "How to enter letters" on page 1.7.
5 Press Stop/Clear to exit.
One-Touch dialling
1 Place document(s) if you are sending a fax.
2 Press and hold one of the number keypad. (0 through 9)
• The display briefly shows the name or number and the number is then automatically dialled. You hear the dialling
process through the speaker.
• When the remote fax machine answers, the machine scans the document into memory and begins to transmit if a
document is loaded in the document feeder.
• To send a fax directly without scanning into memory, turn off the Send From Memory option. (see "Send From Memory"
on page 6.9.)
• You can refer to the number assigned to each location by printing the Phonebook. see "To print a report" on page 6.4.
• Regardless of the setting of the
Send From Memory option, the machine will first dial and then send a fax if you set the
resolution to Super Fine.
Speed dialling
1 Press Speed .
2 Enter a two-digit speed dial location number.
3 Press Enter to dial the number.
• The display briefly shows the name or number and the number is then automatically dialled. You hear the dialling
process through the speaker.
• When the remote fax machine answers, the machine scans the document into memory and begins to transmit if a
document is loaded in the document feeder.
• To send a fax directly without scanning into memory, turn off the Send From Memory option (see "Send From Memory"
on page 6.9.)
• You can refer to the number assigned to each location by printing the Phonebook. see "To print a report" on page 6.4.
• Regardless of the setting of the
Send From Memory option, the machine will first dial and then send a fax if you set the
resolution to Super Fine.
Searching for a number in memory (Directory dialling)
You can search the entire Phonebook to find the number you want to dial.
Searching sequentially through the Phonebook
1 Press Phone Book/Mute .
2 Press < or > to move upward or downward through the directory until you find the number you want.
• Pressing > allows you to search downward through the entire Phonebook by incremental order of location number,
and < allows you to search upward in decreasing order.
3 When the number you want appears in the display, press Start Fax to dial.