Sharp LL-171G - Manual (Page 14)

15
English
Deutsch
Fran
ç
ais
Italiano
Espa
ñ
ol
English
Connection of headphones
(commercially available)
Headphones (commercially available) can be
connected.
Note:
- When the headphones are connected, no sound
can be heard from the monitor speakers.
Connecting the monitor to a power
source
Connecting the monitor and turning the monitor on and off
Turning the power on
1. Turn on the main power of the monitor.
- When switching the main power switch on and
off, always wait for an interval of at least 5
seconds. Rapid switching may result in
malfunction.
2. Press the monitor's power button.
3. Turn on the computer.
When a signal is input from the computer, the
power LED lights up green, and the screen is
displayed. (After power is turned on, it may take
a little time until the screen is displayed.)
Note for LL-171G:
- If the input terminal to which the computer is
connected has not been selected, the screen
will not be displayed. If necessary, perform input
terminal switching. (p.16)
Notes:
- When using an analog signal, perform an
automatic screen adjustment under the following
conditions (p.19):
- Using the monitor for the first time.
- After having changed the system settings
during use.
- When using the LL-171G with a digital connection,
automatic screen adjustment is unnecessary.
- Depending on the type of computer or OS, you
may need to install the monitor set-up
information on your system. (p.28)
- When connecting to a notebook, if the notebook
computer's screen is set to display at the same
time, the MS-DOS screen may not display
properly. In this case, change the setting to
display only the LCD monitor.
Turn on the
computer power
supply.
ON
Headphones
Headphone terminal
AC outlet
Power cord
Power terminal
Main power switch
Press power button.
171AG_gb.P65 12/4/2003, 1:14 PM 15