Sony SLV-D930 - Manual (Page 50)

50 Checking/changing/cancelling timer settings
Checking/changing/cancelling timer
settings
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 9).
• When using a satellite or digital tuner, turn
it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press V/v to select (TIMER) and press ENTER.
The “TIMER METHOD” menu appears.
2 Press V/v to select “Standard,” then press ENTER.
• If you want to change a setting, go on to the next step.
• If you do not need to change the settings, press SET UP to exit the menu.
SET UP
V/v/B/b
ENTER
CLEAR
SET UP
ENTER
Standard
VideoPlus
RETURN
TIMER METHOD
SET UP ENTER V v
ENTER
SET UP