Sony SLV-D930 User Manual

Page 38

Playing a tape

Notes

• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the

picture quality cannot be guaranteed.

• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• Depending on your TV, the following may occur while playing an NTSC-recorded tape:

– The picture becomes black and white.
– The picture shakes.
– No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.

• When 10 hours have passed, the counter in the display window returns to “0:00:00” and the

count starts over again.

• The sound is muted during playback at various speeds.
• The picture may show noise when playing at high speed in reverse.
• While playing a tape, you can display the setup menu, but the remote commander’s function

switches to DVD automatically. Press SET UP to exit the menu.

• Stop disc playback while playing back a video.
• The picture returns to normal playback from slow motion in reverse in 30 seconds.