Sony HWS-BTA2W - Manual (Page 11)

11
US
LINE OUT
Using as a Receiver
Used as a receiver, this unit receives music transmitted from a BLUETOOTH stereo audio
source device.
Note
For details on how to operate the devices to be connected, refer to the operating instructions supplied
with each device.
Preparation
1
Connect the LINE IN jack of a stereo audio output device to the LINE
OUT jack of this unit with the supplied connecting cable.
Tip
When connecting this unit to the phono jack of another device, use the connecting cable RK-G129
(optional).
2
Connect the supplied AC power adaptor to the DC IN 4.5 V jack on
this unit.
3
Set the TX/RX switch to “RX.”
RX
TX
To LINE OUT
jack
To LINE IN
jack
This unit
Connecting cable
(supplied)
To AC outlet
To DC IN
4.5 V jack
This unit
AC power adaptor
(supplied)
This unit
Stereo audio
output device
BLUETOOTH mobile phone or
other BLUETOOTH stereo
audio source device
OPERATING THE UNIT
Example
Stereo audio
output device