Shindaiwa C344 - Manual (Page 3)

3
ALWAYS inspect unit before each
use. Replace any damaged parts.
NEVER run the engine when trans-
porting the unit.
NEVER run the engine indoors! Make
sure there is always good ventila-
tion. Fumes from engine exhaust can
cause serious injury or death.
ALWAYS stop the unit immediately if
it suddenly begins to vibrate or shake.
Inspect for broken, missing or improp-
erly installed parts or attachments.
NEVER extend trimming line beyond
the length specified for your unit.
ALWAYS keep the unit as clean as
practical. Keep it free of loose vegeta-
tion, mud, etc.
ALWAYS hold the unit firmly with both
hands when cutting or trimming, and
maintain control at all times.
ALWAYS use the proper cutting tool
for the job.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug
wire before performing any mainte-
nance work.
ALWAYS, if a saw blade should bind
fast in a cut, shut off the engine imme-
diately. Push the branch or tree to
ease the bind and free the blade.
Work Safely
Trimmers and brushcutters operate at
very high speeds and can do serious
damage or injury if they are misused or
abused. Never allow a person without
training or instruction to operate this
unit!
Stay Alert
You must be physically and mentally fit
to operate this unit safely.
Safety
WARNING!
Never make unauthorized
attachment installations.
WARNING!
Never oper-
ate power equipment of
any kind if you are tired or if you
are under the influence of alcohol,
drugs, medication or any other sub-
stance that could affect your ability
or judgement.
WARNING!
Use Good Judgment
Safety Labels
IMPORTANT!
Safety and Operation Information Labels: Make sure
all information labels are undamaged and readable.
Immediately replace damaged or missing information
labels. New labels are available from your local autho-
rized Shindaiwa dealer.
HOT SURFACE
This label indicates the minimum distance between
front handle and rear grip per ANSI B175.3.