Sharp CD2200M - Manual (Page 21)

EN-20
NO.
12 Enter power level for memory 2.
3
14 Press the STOP/CLEAR pad to exit.
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear
the error code, press the STOP/CLEAR pad and
re-program. See Maximum Cooking Time on page
EN-22.
3. It is not necessary to press the SELECT POWER pad
for 100% in Single Stage.
Programming Multi Stage Cooking
* Suppose you want to set 4 minutes at 60% for the 1st
stage and 2 minutes at 30% for the 2nd stage with
memory 2 using of Dual Digit Input.
1 Press the SET MEMORY pad
twice within 2 seconds.
2 Enter the memory number.
3 Press the SELECT TIME pad.
4 Enter cooking time for 1st stage.
NO.
NO.
4 0 0
0 2
5 Press the SELECT POWER pad.
Procedure Display
13 Press the SET MEMORY pad to
save memory 2.
STOP
CLEAR
Procedure Display
SELECT
TIME
SELECT
POWER
6 Enter power level for 1st stage.
6
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear
the error code, press the STOP/CLEAR pad and
re-program. See Maximum Cooking Time on page
EN-22.
3. It is not necessary to press the SELECT POWER pad
for 100% in the last stage in Multi Stage Cooking.
11 Press the SET MEMORY pad to
save memory.
12 Press the STOP/CLEAR pad to exit.
NO.
9 Press the SELECT POWER pad.
10 Enter power level for 2nd stage.
3
8 Enter cooking time for 2nd stage.
2 0 0
7 Press the SELECT TIME pad.
Procedure Display
SELECT
TIME
SELECT
POWER
STOP
CLEAR
X 2 SET
MEMORY
SET
MEMORY
SET
MEMORY