Sony DVP-C660 - Manual (Page 66)

66
Additional Information
Specifications
CD/DVD player
Laser Semiconductor laser
Signal format system
NTSC
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz
(±1 dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 110 dB (AUDIO OUT connectors
only)
Harmonic distortion
Less than 0.003 %
Dynamic range
More than 100 dB (DVD)
More than 97 dB (CD)
Wow and flutter
Less than detected value
(±0.001 % W PEAK)
Outputs/Inputs
AUDIO OUT
(1, 2)
DIGITAL OUT
(OPTICAL)
DIGITAL OUT
(COAXIAL)
VIDEO OUT
(1, 2)
S VIDEO OUT
(1, 2)
COMPONENT
VIDEO OUT
(Y, P
B /B-Y,
P R /R-Y)
MEGA
CONTROL
AUDIO IN
General
Power requirements
120 V AC, 60 Hz
Power consumption
14 W
Dimensions (approx.)
430
Ч
95
Ч
410 mm
(17
Ч
3 3 ⁄
4
Ч
16 1 ⁄
4
in.) (w/h/d)
incl. projecting parts
Mass (approx.)
5.3 kg (12 lb 2 oz)
Operating temperature
41 ˚F to 95 ˚F (5 ˚C to 35 ˚C)
Operating humidity
25 % to 80 %
Supplied accessories
See page 7.
* The signals from AUDIO OUT connectors are measured. When you
play PCM sound tracks with a 96 kHz sampling frequency, the
output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are
converted to 48 kHz (sampling frequency).
Design and specifications are subject to change without notice.
E NERGY S TAR R is a U.S. registered mark.
As an E NERGY S TAR R Partner, Sony Corporation has
determined that this product meets the E NERGY S TAR R
guidelines for energy efficiency.
Jack
type
Phono
jacks
Optical
output
connector
Phono
jack
Phono
jack
4-pin
mini DIN
Phono
jacks
Mini jack
Phono
jack
Output/input
level
2 Vrms
(at 50 kilohms)
–18 dBm
0.5 Vp-p
1.0 Vp-p
Y: 1.0 Vp-p
C: 0.286 Vp-p
Y: 1.0 Vp-p
P B /B-Y,
P R /R-Y:
0.7 Vp-p
–
2 Vrms
Load impedance
Over 10 kilohms
Wave length: 660 nm
75 ohms terminated
75 ohms,
sync negative
75 ohms,
sync negative
75 ohms terminated
75 ohms,
sync negative
75 ohms
–
47 kilohms