Sony DVP-C660 - Manual (Page 38)

38
Using V
arious Functions with the Contr
ol Menu
VIRTUAL SEMI MULTI DIMENSION
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. This mode creates 5 sets of virtual
speakers surrounding the listener at a 30˚ angle of
elevation.
z You can select “VES” directly
Press VES on the player. Each time you press the button, the item
changes.
Notes
• When you select an item, the sound cuts off for a moment.
• When the playing signal does not contain the surround
component, the effects may be difficult to hear even if you
select “VES TV,” “VES A,” ”VES B” or “VIRTUAL SEMI MULTI
DIMENSION.”
• Set the front speakers to form an equilateral triangle with the
listening position at the top, or the effects may be difficult to
hear even if you select “VES A,” ”VES B” or “VIRTUAL SEMI
MULTI DIMENSION.”
• When you select “VES TV,” “VES A,” ”VES B” or “VIRTUAL
SEMI MULTI DIMENSION,” set the surround settings of the
connected units, such as the amplifier, to OFF.
L R
Effects of each item
OFF
Outputs 2-channel signals for stereo sound. 5-channel
signals for Dolby Digital sound of a DVD are mixed down
to 2-channels.
VES (Virtual Enhanced Surround) TV
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. This mode is effective when the
distance between the front L and R speakers is short, such
as built-in speakers on a stereo TV.
VES (Virtual Enhanced Surround) A
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are reproduced
as shown in the illustration below.
VES (Virtual Enhanced Surround) B
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are reproduced
as shown in the illustration below.
L R
L R
TV
Digital Cinema Sound Settings