Siemens Hicom 150 E - Manual (Page 16)

8
Putting the mobile telephone into service
Removing the protective cover
Remove the protective cover from the display before putting the mo-
bile telephone into service.
Inserting the batteries
Opening the
battery
compartment
Press the ridged area and slide back the battery compartment lid.
Inserting
batteries Insert the permitted batteries observing correct polarity as indicated
in the battery compartment.
Note:
The batteries supplied are not charged. They are only charged
in the mobile telephone.
Note:
• Please observe the safety notes on page I.
• Only use permitted batteries, see page 10.
• Always change both batteries at the same time and only
use batteries of the same type and produced by the same
manufacturer.
• Open the battery compartment in a dust-free environment
only.
• Your telephone directory entries, all settings and your PIN
remain stored even if you remove the batteries. The date
and time settings, however, are lost.