Shuttle Computer Group XPC SA76 - Manual (Page 18)

14
English
CIR Function
This item allows you to set the CIR Function.

The choice: Enabled, or Disabled.
USB Device Setting
Option are in its sub-menu.
Pressto enter the sub-menu of detailed options.
USB 2.0 Controller
Enable or Disable Universal Host Controller Interfacefor Universal
Serial Bus.

The choice: Enabled or Disabled.
USB Operation Mode
Auto decide USB device operation mode.
High speed: If USB device was high speed device, then it operated on
high speed mode.If USB device was full/low speed device,
then it operated on full/low speed mode.
Full/Low Speed: All of USB device operated on full/low speed mode.

The choice: High speed or Full/Low Speed.
USB Storage Function
Enable or Disable Legacy support of USB USB Mass Storage.

The choice: Enabled or Disabled.
*** USB Mass Storage Device Boot Setting ***
UFDDA USB Floppy
UFDDB USB Floppy
No Device
Auto: According to contents of USB MSD decide boot up type.
FDD Mode: The USB MSD always boot up as floppy disk.
HDD Mode: The USB MSD always boot up as hard disk.
 The choice: Auto mode, FDD mode or HDD mode.