Sanyo PLC-WL2500 - Manual (Page 39)

ENGLISH
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Setting up the projector
Item Description
Screen ..................... Switches the screen mode. (Normal, True, Full, Wide, Zoom, Natural wide, Custom)
There may not be available mode depending on the input source and the setting of
Screen aspect (+ p.40) as shown in the table below.
Screen Aspect 16:10 4:3 or 16:9
Input source Input source
Screen mode Video Computer Video Computer
Normal
4 4 4 4
True * 4 * *
Full * 4 4 4
Wide 4 * * *
Zoom 4 * * *
Natural wide 4 * * *
Custom 4 4 4 4
✐ The mark "
4
" means that the
available screen mode in the
selected input source system.
The error message appears
when selecting the disabled
screen mode indicated with
"*".
Screen setting
This function is to adjust the screen mode of
the projector. The values in the text box rep-
resent the current screen status.