Sony KP- 57WV600 - Manual (Page 16)

15
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
KP-57/65WV700
Front Panel
ACCESS
MEMORY
STICK
POWER
STAND BY
TIMER
CHANNEL
VOLUME
TV/VIDEO
FLASH
FOCUS
1
2
3
4
5
6
7
9
q;
8
Item Description
1 MEMORY STICK
ACCESS LED When lit, indicates that the Memory Stick is being
read. (Do not remove the Memory Stick when the
indicator is lit.)
2 MEMORY STICK Memory Stick insertion slot. For details, see “Inserting
and Removing a Memory Stick” on page 66.
3 POWER Press to turn on and off the TV.
4 Infrared Receiver
(IR) Receives IR signals from the TV’s remote control.
5 STAND BY LED Blinks when the TV is turned on, then shuts off when
the picture is displayed. If the LED blinks
continuously, this may indicate the TV needs service
(see “Contacting Sony” on page 90).
6 TIMER LED When lit, indicates one of the timers is set. When the
timer is set, this LED will remain lit even if the TV is
turned off. For details, see page 84.
7 -CHANNEL+ Press to scan through channels. To scan quickly
through channels, press and hold down either
CHANNEL button.
8 -VOLUME + Press to adjust the volume.
9 TV/VIDEO Press repeatedly to cycle through the video equipment
connected to the TV’s video inputs.
0 FLASH FOCUS Press to adjust the convergence (see page 44).
DA4X.book Page 15 Tuesday, April 23, 2002 2:48 PM