Sony STR-DE895 User Manual
Page 71
STR-DE995/895
4-244-963-11(1)GB
71
GB
Additional Information
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf, 2.2 µV/75 ohms
Stereo:
38.3 dBf, 22.5 µV/75 ohms
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code U, CA
With 10-kHz tuning scale: 530 – 1710 kHz
7)
With 9-kHz tuning scale: 531 – 1710 kHz
7)
Models of area code E2/E3
With 10-kHz tuning scale: 530 – 1610 kHz
7)
With 9-kHz tuning scale: 531 – 1602 kHz
7)
Models of area code MX
With 10-kHz tuning scale: 530 – 1610 kHz
Antenna
Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz:
40 dB
7) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press ?/1. All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video:
Y:
1 Vp-p, 75 ohms
P
B
/B-Y:
0.7 Vp-p, 75 ohms
P
R
/R-Y:
0.7 Vp-p, 75 ohms
Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video:
Y:
1 Vp-p, 75 ohms
P
B
/B-Y:
0.7 Vp-p, 75 ohms
P
R
/R-Y:
0.7 Vp-p, 75 ohms
General
Power requirements
Area code
Power requirements
U, CA, MX
120 V AC, 60 Hz
E2/E3
120/220/240 V AC, 50/60 Hz
Power consumption
Area code
Power consumption
U
STR-DE995: 300 W
STR-DE895: 265 W
CA
STR-DE995: 410 VA
STR-DE895: 365 VA
MX, E2/E3
STR-DE895: 265 W
Power consumption (during standby mode)
0.3 W (when “POWER SAVE” in the CUSTOMIZE
menu is set to “ON”) (page 42).
continued