beautypg.com

Selecting the command mode of the, Remote, Selecting the command mode of the remote – Sony STR-DE895 User Manual

Page 50: Remote button description (continued)

background image

50

GB

STR-DE995/895

4-244-963-11(1)GB

RM-PP412 only

Remote

Operations

Function

Button

MD/TAPE Receiver

To listen to Minidisc or
audio tape.

AUX

Receiver

To listen to an audio
equipment.

RM-PG412 only

Remote

Operations

Function

Button

TAPE

Receiver

To listen to audio tape.

MD/DAT

Receiver

To listen to Minidisc
or DAT deck.

2ND

Remote

Select the command
mode of the remote.

M1 and

Remote

To perform several

M2

commands in sequence
automatically.

Notes

• Some functions explained in this section may not

work depending on the model of the receiver.

• The above explanation is intended to serve as an

example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.

• To activate the buttons with orange printing, press

ALT first before pressing the buttons.

• Press MAIN MENU on the remote before you use

the

V/v/B/b buttons for receiver operation.

• Press TOP MENU/GUIDE or AV MENU on the

remote before you use the remote to control the
satellite tuner, VCR and DVD player.

• RM-PP412

– (STR-DE895) The AUX, AAC BI-LING, 12 and

ON SCREEN buttons on the remote are not
available.

• RM-PG412

– (STR-DE995) The AAC BI-LING and 12 buttons

on the remote are not available.

– (STR-DE895) The AAC BI-LING, 12 and ON

SCREEN buttons on the remote are not available.

Remote button description
(continued)

Selecting the command
mode of the remote

Set the remote command mode using the USE
MODE button and the remote command mode
buttons.

Selecting the command mode

You can switch the command mode (AV1 or
AV2) of the remote. If the command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.

Press AV1 or AV2 while pressing down
USE MODE.

The indicator lights once (twice for AV2) , then
the command mode switches.

To check the command mode of the

remote

Press USE MODE. You can check the remote
by the indicator.

Mode

Indicator lights

AV1

once

AV2

twice

To reset the remote to factory

settings

Press =/1, AV =/1, and MASTER VOL – at
the same time.

The indicator lights 3 times, then goes off.

This manual is related to the following products: