Sony KP 53V80 - Manual (Page 32)

28
Using Your New Projection TV (continued)
Using CHANNEL INDEX
You can use the CHANNEL INDEX feature
to display multiple channels and select one
directly.
Channels used for CHANNEL INDEX will
come directly from the TV’s list of receivable
channels (those set during Auto Program or
through the Channel Set Up menu).
1 Press .
The current channel will be reduced in
size and displayed in the center of the
screen in normal motion picture format.
The first twelve receivable channels will
appear one after another, clockwise,
around the center picture. These small
pictures are updated in intervals of one
second. The channel number and channel
caption (if set) on the second and later
appearances will dim.
A yellow-colored frame will appear to
indicate current channel selection.
10
Notes:
• The projection TV will continually update
each of the surrounding pictures while
the CHANNEL INDEX screen is
displayed.
• Sound will only be heard from the center
picture.
• If one of the pictures received through
CHANNEL INDEX is snowy, the entire
screen may become unstable. In this case,
erase the snowy channel. (see “Channel
Skip/Add” on page 35)
• If you leave the CHANNEL INDEX
screen displayed for about 20 minutes
without any additional operation,
CHANNEL INDEX is canceled and the
normal picture reappears.
2 Move the joystick in any direction to
move the yellow frame to the picture that
you wish to view.
3 Press .
The selected picture will be enlarged for
normal viewing.
To cancel CHANNEL INDEX
Press again, or select a TV channel using
the 0-9 and ENTER buttons.
Tips z
• To cycle through the receivable channels at a time,
press CH +/–.
• To freeze the center picture, press FREEZE.
Press it again to resume normal center picture
viewing.
R e c i i p e f l o u r - - - - 2 s u g a r - - - 1/2 s a l t - - - - - 1/2 b u t t e r - - - 1