Sony KP 53V80 - Manual (Page 14)

10
Installing and Connecting the Projection TV (continued)
Connecting a camcorder
Use this connection to view a picture directly
from your camcorder.
1 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on
the camcorder to AUDIO and S VIDEO
IN inside the drop-down panel on the
front of the projection TV (White-AUDIO
Left, Red-AUDIO Right**).
2 Press VIDEO 2 to select the video inputs
from a camcorder.
* If your camcorder is not equipped with S
VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
** If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
Disconnect all power sources before making any connections.
(Front of projection TV)
Camcorder
Audio/
video
outputs
VIDEO
VMC-810S/820S
(not supplied)
AUDIO-L
AUDIO-R
S VIDEO VIDEO L
(MONO)
R AUDIO
VIDEO 2 INPUT
YC-15V/30V (not supplied)
S VIDEO
S VIDEO
OUT