Shindaiwa MULTiPURPOSE TOOL CaRRiER M254 - Manual (Page 12)

12
Adjust the shoulder strap so the
shoulder pad rests comfortably on the
off-side shoulder and the cutting path
of the cutting attachment is parallel to
the ground. Make sure all hooks and
adjustment devices are secure.
Shoulder strap
nOTE:
Although a shoulder strap accessory
is not required for use with a grass
unit, a shoulder strap can increase
operator comfort during extended
periods of operation.
Maintenance
waRninG!
Before performing any main-
tenance, repair, or cleaning work on
the unit, make sure the engine and
cutting attachment are completely
stopped. Disconnect the spark plug
wire before performing service or
maintenance.
waRninG!
Non-standard accessories,
cutting attachment, or replacement
parts may not operate properly with
your unit and may cause damage and
lead to personal injury.
iMPORTanT!
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PER-
FORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PER-
FORMED BY A DEALER OR SERVICE CENTER AUTHORIZED BY ECHO, INC. THE USE OF PARTS THAT ARE NOT
EQUIVALENT IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF
THE EMISSION CONTROL SYSTEM AND MAY HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.
Spark Plug
Keep the spark plug and wire connec-
tions tight and clean.
Fasteners
Make sure nuts, bolts, and screws
(except carburetor adjusting screws)
are tight.
Muffler
This unit must never be operated with
a faulty or missing spark arrester or
muffler. Make sure the muffler is well
secured and in good condition. A worn
or damaged muffler is a fire hazard and
may also cause hearing loss.
General maintenance
nOTE:
Using non-standard replacement
parts could invalidate your Shindaiwa
warranty.
air Filter
The H4 engine that powers your
Shindaiwa model is a hybrid 4-stroke
engine. As a hybrid, the engine is
lubricated by oil mixed with the gaso-
line and air from the carburetor that
moves through and around the internal
parts of the engine in a similar way
that a 2-stroke engine is lubricated.
Without the heavy duty 2-stage air
filter equipped on all H4 engines, dust
and dirt could also move through the
engine, decreasing engine life, increas-
ing valve wear and the need for more
frequent valve adjustments. To keep
your H4 engine strong and reliable,
Shindaiwa recommends that you check
and service the air filter as instructed
in the 10-Hour Maintenance.