Sanus Systems VP1 - Manual (Page 13)

6901-002053 <00>
13
1
2
3
3
English
Install Swivel Mount
1. Carefully screw swivel mount [07] onto threaded tube [04] or [05]
until hand tight.
2. Position the front of the swivel mount [07] towards the target area
then carefully tighten the set screw with hex key [16].
CAUTION: DO NOT OVERTIGHTEN!
Overtightening of set screw can damage threads on pipe.
3. Turn security screw using a Phillips screwdriver until set screw cannot
be seen through access hole in swivel mount [07].
[16]
[02], [03]
[02], [03]
[02], [03]
[04], [05]
[04], [05]
[04], [05]
[07]
[07] [16]
[07]