Sanus Systems VP1 - Manual (Page 12)

6901-002053 <00>
12
2
1
3
2-2
English
Hanging Tube and Plate Cover
1. Carefully screw threaded tube [04] or [05] into ceiling plate until tube
either contacts the ceiling or is fully threaded into plate [01].
2. Insert tube locking screw [19] into plate [01] and tighten securely
with hex key [16].
CAUTION: DO NOT OVERTIGHTEN!
Overtightening of set screw can damage threads on pipe.
3. Press plate cover [02] or [03] onto ceiling plate [01].
[19]
[16]
[16] [19]
[01]
[01]
[01]
[02],
[03]
[04], [05]
[04], [05]
[04], [05]