Woodstock W2000 - Manual (Page 3)

2 – W2000 Rebel ®
For Your Own Safety, Read Instructions Before Using The Rebel ®
A. Safety Instructions For All Tools
These safety rules cannot cover every situation in a workshop. Consider your individual workshop conditions
when setting up or operating any machine.
• Always wear eye protection
• Always feed against the rotation of the cutter
• Use overhead guard when fence is not in place
• Keep fingers away from rotating cutters
• Do not use awkward hand positions
7. KEEP CHILDREN AND VISITORS
AWAY. All children and visitors should be kept
a safe distance away from your work area.
8. MAKE WORKSHOP CHILD-PROOF with
padlocks, master switches, or by removing
starter keys.
9. DO NOT FORCE TOOL. Tools work better
and more safely when they are allowed to work
at their own speed.
10. WEAR PROPER APPAREL. Do not wear
loose clothing, gloves, neckties, or jewelry that
might get caught in moving parts. Non-slip
footwear should be worn. Wear a hat or other
protective head wear if your hair is long.
11. NEVER STAND OR LEAN ON TOOL.
12. USE SAFETY GLASSES AND EAR PRO-
TECTION. Also use a DUST MASK if the cut-
ting operation is dusty.
1. KNOW YOUR POWER TOOL. Read the
owner’s manual carefully. Learn the tool’s
applications and limitations, as well as its par-
ticular hazards.
2. KEEP ALL GUARDS IN PLACE and in
working order.
3. GROUND ALL POWER TOOLS. If an
adapter is used to accommodate a two-prong
receptacle, the adapter plug must be attached
to a known ground. Never remove the ground-
ing prong.
4. REMOVE ADJUSTING KEYS AND
WRENCHES. Make it a habit to check that
keys and adjusting wrenches are removed from
the machine before turning it on.
5. KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
6. AVOID DANGEROUS ENVIRONMENTS.
Do not use power tools in damp or wet loca-
tions or expose them to rain. Keep your work
area well lighted.
I. Introduction