Woodstock W2000 - Manual (Page 22)

W2000 Rebel ® – 21
Because there are no moving parts, maintenance is vir-
tually eliminated. However, we do make the following
recommendations:
• Give the table a shot of some type of protec-
tive coating. Many types of machine table
coatings are available on the market today.
These will keep the table surface in prime
condition and reduces friction when feeding
material.
• Periodically check all bolts and fasteners to
make sure that they are tight.
• Periodically check the router insert and
ensure that it is flush to The Rebel ® table.
Ensure that the router is firmly mounted to
the router insert.
• Inspect the router, especially the collet.
Ensure that the collet tightens securely
around the router bit.
V. Maintenance
Any maintenance performed on The Rebel ® should
be only done after the router has been turned off and
the cutter has come to a complete stop and the plug
pulled from the outlet. Failure to do so may result in
serious personal injury.