Samsung WS32A11 - Manual (Page 27)

If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1 Press the MENU ( ) button.
Result: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setup group are
displayed.
3 Press the ENTER ( ) button.
4 Press the ▼ or ▲ button to select Blue Screen.
5 To activate this feature, select On by pressing the œ or √ button.
6 When you have finished, press the EXIT ( ) button to exit.
Setting the Blue Screen
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1 Press the MENU ( ) button.
Result: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result: The options available in the Picture group are
displayed.
3 Press the ENTER ( ) button.
4 Press the
▼ or ▲ button to select Tilt.
5 Press the œ or √ button to reach the required setting (-7 to +7).
6 When you have finished, press the EXIT ( ) button to exit.
Using the Tilt Control Feature
Move œ œ √ √ Adjust Return
Setup
Plug & Play √ √
Language : English
Time √ √
Blue Screen œ œ On √ √
Melody : On
Demonstration √ √
TV
Move œ œ √ √ Adjust Return
Picture
… … More
Tilt œ œ 3 √ √
PIP √ √
TV
English-27
AA68-03606A-00Eng_Asia 3/10/05 10:44 AM Page 27