Star Micronics LC-90 - Manual (Page 74)

Chapter4.frame Black #1
65
Chapter 4: Control Panel
Operations
The control panel gives you push-button control over
the printer’s power and paper feed operations. It also
includes an indicator light that tells you the current
status of the printer at a glance.
To enter the Sleep Mode
❏ Hold down Power for a few seconds. The printer
beeps when it enters the Sleep Mode.
❏ For details about the Sleep Mode, see page 33 of
this manual.
To restore full power from the Sleep
Mode
❏ Press Power .
Note:
For full details on paper handling, see page 69 of
this manual.
Important!
We recommend that you unplug the printer from the
power outlet whenever you do not plan to use it for
long periods. Because of the this, you should locate
the printer so that the power outlet it is plugged into
is nearby and easy to access.
Important!
The printer automatically enters the Sleep Mode
when you plug it in to an AC outlet. Be sure to press
Power to power up the printer after plugging it in.