Woodstock SB1039F - Manual (Page 51)

For Machines Mfg. Since 5/11 14" TURN-X ® Toolroom Lathe
-45-
O P E R A T I O N
Follow Rest
The follow rest mounts to the saddle with two
cap screws (see Figure 56). It is used on long,
slender parts to prevent workpiece deflection
from the pressure of the cutting tool during
operation. Adjust the follow rest fingers in the
same manner as the those on the steady rest.
Note: To reduce the effects of friction, lubricate
the brass finger tips with generous lubricant
during operation.
Figure 56 . Follow rest attachment.
Cap
Screws
Carriage & Slide Locks
The carriage, cross slide, and compound rest
have locks that can be tightened to provide
additional rigidity during operation, especially
during heavy cuts.
See Figures 57–58 to identify the locations of
the locks for each device.
Figure 57. Location of carriage and cross slide locks.
Carriage
Lock
Cross Slide
Lock
Figure 58. Location of compound rest lock.
Compound Rest
Lock