Socket Mobile 56K Modem Card - Manual (Page 9)

CHAPTER 2: SETUP FOR WINDOWS CE | 9
STEP 4: Insert the Card
Note: If you installed Socket’s WhereAreYou? software, you
may want to use it now to set up the modem card for your
country. You must start this process BEFORE inserting the
card. For instructions, go to page
32 .
Insert the 56K Modem Card into your mobile computer, with the gray label
on top. If using a PC Card slot, first plug the card into a CompactFlash-to-
PC Card adapter.
Warning! Do NOT insert the card upside down, or damage may occur!
When you insert the card, the Power and Data Status LEDs will blink then
turn off.
STEP 5: Set up the Dial-up Connection
The process for setting up a dial-up connection differs between Pocket PC
2000/2002/2003, and Handheld PC devices. In the following pages, find the
instructions for your specific type of Windows CE-based mobile computer.
You will need your dial-up information for this step. For most devices, this
step involves two separate parts: making a new connection and entering the
dialing settings.
Plug the card
directly into a
CompactFlash
I/O slot.
OR
Insert card into
an adapter for
use in a PC
Card slot.